BARS - TRILOY® HT - METALLURGICAL DATA
Triloy® HT Metallurgical Data
Hardenability:
Mechanical Properties:
A surface Brinell Hardness of 286 to 340 BHN is guaranteed on each Triloy® HT bar. Mechanical Properties are reported for information only on a per size per heat basis. Typical properties are shown below. Variance in properties are dependent on diameter. If minimum mechanical properties are required, please inquire your specifications with Tricon®'s metallurgical staff.
Tensile
Strength
125/170
KSI
Yield
Strength
115/150
KSI
Elongation
in 2"
Reduct.
of Area
44/60
%
Brinell
Hardness
286/340
BHN
Charpy
V-Notch
50
ft-lbs @ R.T.
Modulus of Elasticity:
Ratio of stress to Corresponding Strain
30,000,000 psi *
*Regardless of Microstructure and Hardness